Automotive Ethernet Converter
The Automotive Ethernet Converter converts Gigabit Ethernet data between Automotive Ethernet and standard Ethernet.
- Converts 100/1000BASE-T1 100/1000BASE-T
- High-speed CAN transceiver
- Configuration via DIP switches
| Data Rate | Up to 1 Gbit/s |
|---|---|
| Conversion | 100/1000BASE-T1 and 100/1000BASE-T |
| Temperatures | -40 °C to +60 °C |
| Dimensions | 21 x 56 x 104 mm |
Product details
Product description
The further development of our OABR2Ethernet media converter is now also capable of converting Gigabit Ethernet data between 1000BASE-T1 and standard Ethernet. 100BASE-T1 is also supported. The device is primarily used to convert Ethernet signals between a vehicle’s control unit on one side and a PC or data logger on the other. It can also be used for any other application where this functionality is required.
The Automotive Ethernet Converter also contains a high-speed CAN transceiver. If no activity is detected on the connected CAN bus, the device can optionally be set to sleep mode to reduce power consumption. The length of time without CAN activity can be set via software.
The basic configuration is carried out via DIP switches and LEDs indicate the status of the media converter and the connected interfaces. The device’s firmware can be updated via a USB bootloader.
Device variants
No other device variant is available for this device.
Front & rear view
| A | Link LED for 100/1000BASE-T1 |
| B | Connection for power supply, 100/1000BASE-T1 and CAN |
| C | Service interface |
| D | General status LED |
| E | LED for CAN |
| F | Activity LED for 100/1000Base-T1 |
| G | Activity LED for Ethernet |
| H | Link LED for Ethernet |
| I | DIP switch |
| J | Reset button |
| K | Ethernet interface |
Project-specific adaptations
All components of the XORAYA ecosystem are designed to work together seamlessly and can be flexibly combined to create individual system solutions. The modular architecture enables targeted expansions without changing the existing system logic – for a consistent and scalable system in terms of data rate, memory, interfaces and performance.
Verification, tests & conformity to standards
All devices undergo comprehensive verification tests, including functional tests, boundary scan tests and system tests as well as EMC tests. In addition, mechanical function and wear tests, vibration tests and temperature and humidity tests are carried out to ensure reliability under real operating conditions.
Our development and business processes meet the requirements of ISO 9001 and ISO 14001. X2E is also certified according to TISAX® (ENX Association) and meets the information security requirements of the automotive industry. All devices bear the CE mark and comply with the applicable European directives.
Accessories
No separate accessories are currently available for the Automotive Ethernet Converter.
Downloads
Here you will find the available documents for the Automotive Ethernet Converter.
FAQ
In this FAQ you will find answers to key questions about the Automotive Ethernet Converter – from typical application scenarios and technical features to how it compares to other solutions.
Which Ethernet standards does the Automotive Ethernet Converter support?
The Automotive Ethernet Converter supports both 1000BASE-T1 (Gigabit Automotive Ethernet) and 100BASE-T1. It converts the data to standard Ethernet, thereby enabling the connection of vehicle control units to PCs, data loggers, or other Ethernet-enabled devices.
How is the Automotive Ethernet Converter configured and updated?
Basic configuration is easily performed using integrated DIP switches. LEDs indicate the status of the media converter and connected interfaces at all times. Firmware updates can be conveniently installed via the USB bootloader.
