OABR2CAN Media Gateway
The OABR2CAN media gateway allows data to be translated in both directions between an OABR interface and two HS-CAN interfaces.
OABR2CAN is an automotive media gateway between one OPEN Alliance BroadR-Reach® (OABR) interface and two high-speed CAN interfaces. A user-editable routing table stores the information of how the data is transferred between the interfaces.
If there is no activity on the connected CAN buses, the media gateway can optionally be put into sleep mode to reduce power consumption. The sleep timeout is configurable via software.
Basic configuration is realised with DIP switches, and LEDs provide information about the current status of the media gateway and the connected interfaces. The firmware of the device can be updated via USB bootloader.
*All X2E OABR products run through Teledyne LeCroy’s QualiPHY Compliance Test. We gladly provide you with the test results.
Product Features of the OABR2CAN media gateway:
|Converstion||Routes between OABR and |
|Miscellaneous||Configuration via DIP switches|
|Firmware update via USB |
All technical specifications at a glance:
|Dimensions (H x W x D)||20,9 x 55,8 x 84 mm|
|CAN Baud Rate||100 kbit/s to 1 Mbit/s|
|Temperature Range||-40 °C bis +65 °C|
|Current Consumption (standby)||max. 4 mA|
|Current Consumption||max. 120 mA|
|Supply Voltage||5 V to 28 V|
|Connectors||1x 8-pin connector for OABR, power and CAN |
1x Micro USB as a service interface
|DIP Switches||Master-/Slave-Mode |
|LEDs||OABR link and activity |
The following accessories are included:
|Product||OABR2CAN Media Gateway|
We recommend the following accessories:
If you have any further questions, please get in touch with us.
Our contact person for Automotive Data Logging Solutions will be pleased to help you!
- Matthias Müller
+49 7275 9143 211
+49 7275 9143 109