Data Logger XORAYA Z7
The XORAYA Z7 is a high-performance automotive data logger with customizable interfaces based on the Xilinx Zynq®-7000 All Programmable SoC.
Product
Overview
The XORAYA Z7 is the latest generation of our high-performance automotive data logger, which is capable of recording various vehicle bus systems simultaniously. Measurement data is either written to the internal hard disk or transferred to an external computer system via the Ethernet interface using a precise, central time stamp with a resolution of 100 ns. Optionally, the data can also be stored on an External Storage Unit. A built-in supercapacitor unit is able to bridge power fluctuations and to shut the data logger down safely in case of power failures.
In addition to a default interface configuration, the data logger has 4 configurable slots for adding additional interfaces to the device. The following modules are currently supported by the XORAYA Z7:
Default
Interfaces:
- 20x HS-CAN at least
4x CAN-FD - 2x FlexRay
- 8x RS-232
- 1x Gbit-Ethernet (4-Port-Switch)
3 x free slots for the
following modules:
4x / 7x LIN
Interface
4x CAN-FD
Interface
4x PSI5
Interface
8x RS-232
Interface
6x Analog
Interface
1 x free slot for the
following module:
24x LIN
Interface
Default
Interfaces:
- 20x HS-CAN thereof 4x CAN-FD
- 2x FlexRay
- 8x RS232
- 1x Gbit-Ethernet
(4-Port-Switch)
3 x free slots for the
following modules:
- 4x / 7x LIN
- 4x PSI5
- 4x CAN
- 8x RS-232
- 6x Analog
1 x free slot for the
following module:
- 24x LIN
In addition, an extension to CCP / XCP and a camera interface are available. The support of further bus systems and extensions is also possible on request.
Customer-Specific
Adjustments
The modular design of the XORAYA Z7 allows numerous customizations. For example, the device can be assembled or retrofitted according to customer requirements. As a result, the datalogger can be quickly and efficiently adapted to changing conditions and can develop continuously with your projects.
- Interfaces
The Z7 has three slots for plug-in cards, which allow a flexible configuration of the data logger. In addition, an add-on board is available that equips the datalogger with 12 OABR ports.
- Performance
The built-in Xilinx FPGA can also be exchanged for a more powerful FPGA module including the RAMs. In addition, the built-in hard disk space can be extended from 240 GB to 1 TB.
- Software
Software adjustments are possible on customer request as well. For example, additional export formats can be implemented as needed.
- Installation
From the customer-specific cable set to the corresponding installation racks to the complete installation in test vehicles, various customer-specific solutions are offered.
Product
Specifications
The default configuration of the data logger can be extended with further Interfaces at any time:
| Number of configurable interface slots: | 4 |
| Preconfigured log interfaces: | 20x HS-CAN (at least 4x CAN-FD) 8x RS-232 1x Dual-FlexRay 4x Gigabit Ethernet |
The following interface configurations are currently supported out-of-the-box:
| Configuration | HS-CAN | CAN-FD (via HS-CAN) | RS-232 | FlexRay | LIN | Analog | Gbit-Ethernet |
| R8F2C20Ge1 | 20 | 4 | 8 | 2 | – | – | 1 |
| R8F2C20L7Ge1 | 20 | 4 | 8 | 2 | 7 | – | 1 |
| R8F2C20A6L24Ge1 | 20 | 4 | 8 | 2 | 24 | 6 | 1 |
All technical specifications of the XORAYA Z7 at a glance:
| Dimension (H x W x D) | 55 x 250 x 205mm (without impact protection) |
| Processor | 2x ARM Cortex-A9-766MHz |
| RAM | 1GB RAM DDR3-1066 / 256MB Flash |
| Storage | 240 GB – 1 TB |
| Operating System | Embedded Linux |
| Data Rate | 1,2 Gbit/s |
| Download Rate | 800Mbit/s via GbE |
| Zentral Timestamp | 100 ns |
| Supercap-Unit | Yes |
| Battery-buffered Real-time Clock | Yes |
| Temperature Range | -40 to +65°C |
| External Operating Voltage | 6 to 36 V |
|
Current consumption (standard mode) |
max 1A (at 12 V) |
|
Current consumption (standby) |
max 0,9mA (at 12 V) |
| Automatic sleep mode | Yes |
| Wake up by | via Can FlexRay RS-232 LIN MOST PSI5 Wakeline Trigger |
| Record Mode | Internal Storage External Storage Unit PC via Ethernet |
The following accessories are included:
| Product | XORAYA Z7 with impact protection |
| Cable | Connection Cable Set Power Cable ESU-Cable |
| Software | XORAYA Suite XORAYA SDK |
| Miscellaneous | Operation Manual |
We recommend the following accessories:
XORAYA Accessories
Cable Sets
External Storage
External Storage Unit
Copy Station
XORAYA Datacube
In addition, we recommend the following training:
User Training
XORAYA Data Loggers
Datasheet
Version: 1.1_EN
Manual
Version: 1.2.2_EN
XORAYA Suite
Access for X2E Wiki required
Firmware
Access for X2E Wiki required
Your
Contact
If you have any further questions, please get in touch with us.
Our contact person for Automotive Data Logging Solutions will be pleased to help you!
- Matthias Müller
Technical Sales
- Phone
+49 6349 995 99 211
- Fax
+49 6349 995 99 109
- Email
sales@x2e.de
